{"product_id":"polaris-rzr-s-1000-rackboss-2-0-rack-and-pinion","title":"POLARIS RZR S 1000 RACKBOSS 2.0 RACK AND PINION","description":"\u003cp\u003e\u003cstrong\u003ePOLARIS RZR S 1000 RACKBOSS 2.0 RACK AND PINION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRack Boss 2.0 Changes the Game\u003c\/p\u003e\u003cp\u003eThe fate of every rack is to wear down over time, get sloppy, and make your steering responsiveness feel terrible. That all changes with Rack Boss 2.0. It’s an evolution of our original Rack Boss and designed to be the strongest, most durable rack on the market. It uses X24 Tech—a dual-bushing design that reduces wear by over 50% compared to stock. You can’t find that kind of improvement anywhere else. Get SuperATV’s Rack Boss 2.0 Rack and Pinion installed on your Polaris RZR S 1000. With it, you can run bigger tires, take on treacherous terrain, and ride with confidence everywhere you go.\u003c\/p\u003e\u003cp\u003eLess Wear and Tear with Our Dual-Bushing Design\u003c\/p\u003e\u003cp\u003eWhat makes Rack Boss 2.0 so good at preventing slop? It’s engineered with X24 Tech—heavy-duty PTFE bushings at both ends of the rack that remove play from the internals. Reducing play also keeps the tension spring nearly motionless. With little to no unintended internal movement, this rack can turn massive tires through heavy rides and hard hits and still stay in like-new condition for years longer than the next best rack. And with the built-in grease fitting, you can push fresh grease through after you go deep in mud or water.\u003c\/p\u003e\u003cp\u003eSolid Steel Bar Tie Rods\u003c\/p\u003e\u003cp\u003eFor a beefy tie rod setup, you want to go with solid steel bar tie rods. They’re made with 1” diameter steel bars that are paired with bigger, better tie rods you’ll love—3\/4” outer heim joint tie rods and rebuildable inner tie rods that use 3\/4” rod threads and 16 mm rack threads. Altogether, they’re built for hard hits, big tires, and wild rides.\u003c\/p\u003e\u003cp\u003eSwaged Tube Tie Rods\u003c\/p\u003e\u003cp\u003eFor lightweight strength you can count on, get our swaged tube tie rods. They use a 7\/8” steel tube that’s flared out to boost strength and eliminate shearing. Plus, they’re paired with our top-shelf, oversized tie rod ends. They use 16 mm rack threads and 14 mm rod threads to make sure the most common failure points are as tough as they can be. This setup is perfect for folks that push the limits of their stock machine.\u003c\/p\u003e\u003cp\u003eRack Boss 2.0 Swaged Tie Rod Rack Boss 2.0 Solid Steel Tie Rod\u003c\/p\u003e\u003cp\u003eX24 Tech Dual-Bushing Design ✔ ✔\u003c\/p\u003e\u003cp\u003eInner Ball and Socket Thread Diameter 14 mm rod threads, 16 mm rack threads 3\/4” rod threads, 16 mm rack threads\u003c\/p\u003e\u003cp\u003eOuter Tie Rod End Thread Diameter 14 mm 3\/4”\u003c\/p\u003e\u003cp\u003eTie Rod Material Steel tube Solid steel bar\u003c\/p\u003e\u003cp\u003eGreasable ✔ ✔\u003c\/p\u003e\u003cp\u003eInner Boots ✔ ✔\u003c\/p\u003e\u003cp\u003eSteering Stop Kit ✔ ✔\u003c\/p\u003e\u003cp\u003eMisalignment Bushings, Tie Rod Studs, \u0026amp; Hardware ✔ ✔\u003c\/p\u003e\u003cp\u003ePatent No. 11,345,393\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty dual PTFE bushings: Designed with X24 Tech Prevents wear Reduces slop Improves overall durability\u003c\/li\u003e\n\u003cli\u003eDesigned with X24 Tech\u003c\/li\u003e\n\u003cli\u003ePrevents wear\u003c\/li\u003e\n\u003cli\u003eReduces slop\u003c\/li\u003e\n\u003cli\u003eImproves overall durability\u003c\/li\u003e\n\u003cli\u003eSolid steel tie rods use: 3\/4” outer tie rod ends Rebuildable inner tie rod ends that use 3\/4” rod threads and 16 mm rack threads\u003c\/li\u003e\n\u003cli\u003e3\/4” outer tie rod ends\u003c\/li\u003e\n\u003cli\u003eRebuildable inner tie rod ends that use 3\/4” rod threads and 16 mm rack threads\u003c\/li\u003e\n\u003cli\u003eSwaged tube tie rods use: 14 mm outer tie rod ends Rebuildable inner tie rod ends that use 14 mm rod threads and 16 mm rack threads\u003c\/li\u003e\n\u003cli\u003e14 mm outer tie rod ends\u003c\/li\u003e\n\u003cli\u003eRebuildable inner tie rod ends that use 14 mm rod threads and 16 mm rack threads\u003c\/li\u003e\n\u003cli\u003e65% larger housing than stock\u003c\/li\u003e\n\u003cli\u003eOver 50% less wear than OEM after 15,000 cycles\u003c\/li\u003e\n\u003cli\u003eGrease fitting for rack gears\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePolaris RZR S 1000 : 2016-2020\u003c\/li\u003e\n\u003cli\u003ePolaris RZR S4 1000 : 2019-2020\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SuperATV","offers":[{"title":"Default Title","offer_id":66747465007149,"sku":"HDRP-P-RZR900S-SK","price":394.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0717\/9209\/9373\/files\/polaris_rzr_xpt_heavy-duty_rack_pinion_kit_1_10.jpg?v=1779441473","url":"https:\/\/reedcycles.com\/products\/polaris-rzr-s-1000-rackboss-2-0-rack-and-pinion","provider":"ReedCycles","version":"1.0","type":"link"}